Pioneer DVR-108D

We took our first look at the Pioneer 108D under the official US firmware (at the time) back in August. Since then, we retested the drive with lots of new media and a newer firmware. Pioneer and NEC arguably share the title of most mature 16X solutions available - both drives have been available for three months now.

Below, you can see the individual specifications of the drive.

 Pioneer DVR-108D 16x DVD-/+RW Drive
Interface PATA
CD Write Speed 32X, 24X ZCLV
16X, 8X, 4X CLV
CD Rewrite Speed 24X ZCLV
16X, 10X, 4X CLV
CD Read Speed 40X MAX CAV
DVD-R Write Speed 16X, 12X, 8X CLV
4X, 2X, 1X
DVD-RW Rewrite Speed 4X, 2X, 1X CLV
DVD+R Write Speed 16X, 12X, 8X ZCLV
4X, 2.4X
DVD+RW Rewrite Speed 4X, 2.4X CLV
DVD+DL Write Speed 2.4X CLV
DVD-RAM Read Speed 2X CLV
DVD Read Speed 16X MAX CAV
Supported Modes DAO / DAO-RAW 16 & 96
TAO
SAO / RAW SAO, RAW SAO 16 & 96
Packet Write
Multi-Session
Supported Formats DVD+R (DAO, incremental, seq)
DVD+RW (random)
DVD-R (DAO, incremental, seq)
DVD-RW (restricted overwrite)

CD-R, CD-RW, CD-ROM, CD-DA,
Mixed Mode, CD Extra
Photo CD, CD Text, Bootable CD, UDF
Access Time CD: 130ms
DVD: 140ms
Buffer 2MB

Since Pioneer is our definitive 16X recorder that we have already reviewed, we are comparing all of our specifications against it. The most disappointing aspect of the drive that we have noticed during our analysis over these last few weeks has been the (relatively) slow CDR burn speeds. DVDR burn speeds are excellent, and the drive technically supports 4X DVD+DL burn speeds, even though it does not readily advertise such. You can see our original DL tests on the drive here.

Retail versions of the drive come with a redesigned bezel look. For the OEM version that we obtained for the review, the bezel retains the same bland pale design seen in the Pioneer 107 and 106D (and its derivatives).




Click to enlarge.


The drive is recognized in Nero's Infotool as such:



Here's a high resolution scan of the topside of the DVR-108D showing off its label.




Click to enlarge.


Below, you can see another high resolution scan of the drive's internal components.




Click to enlarge.


Our drive came with the NEC D63635GM and C3335 chipsets featuring Hynix DRAM. NEC's D63635 digital signal processor (DSP) was the first to 16X, and thus far, has a very stable track record. Keep in mind, even though the NEC 3500A and the Pioneer 108D utilize the same controllers and servos, they are designed and built completely different. NEC's design revolves around a single double-sided PCB with differing flash/DRAM solutions. The Pioneer drive also supports reading of DVD-RAM media at 5X speeds. There are many similarities between the drives, such as the multi-chip analog controller approach.

A few other drives on the market, like the ASUS DRW-1604P, are built on the same design and chipset, and generally offer identical performance. However, the Pioneer 108D has the most mature firmware and reference design; its performance should equal or surpass other models on the same platform.

Feel free to download the performance graphs for the DVR-108D here.

The Test NEC ND-3500A
Comments Locked

65 Comments

View All Comments

  • Sabresiberian - Monday, November 1, 2004 - link

    #15 DL is important to me because I know the price of media will drop and I want the drive I buy to be as useful as possible for the longest time possible. I might be buying it today but I will be using it tomorrow :) Overall you make some good points :)

    I think this is a difficult time to do this kind of article, because other improved versions will be available before the end of the year. For example, the Plextor 716A will be released with SATA capabilities.

    I think its wierd that you couldn't get the Plextor drive in time, as I know this product has been reviewed by others.
  • southernpac - Monday, November 1, 2004 - link

    A recent (17 August) article in PC World advised extreme caution when buying an OEM (versus retail) DVD burner. It said that OEM units "carry no manufacturer's warranty, lack burning software and are ineligible for firmware upgrades" (therefore costing more in the long run). Many examples were given. I would appreciate advise as to whether this is percieved to be a real concern. If so, NEC has no retail outlet - how would you buy a non-OEM unit?
  • southernpac - Monday, November 1, 2004 - link

    A recent (August 17th) PC World article advised extreme caution when buying OEM vs. retail DVD burners. It claimed that OEM versions carry no manufacturer's warranty, lack software and are ineligible for firmware upgrades (therefore actually costing more in the long run). Many examples were given. I would appreciate some advise as to whether this is percieved to be a real risk. If so, NEC has no retail outlet - how would you buy a non-OEM unit? Bill
  • Gatak - Monday, November 1, 2004 - link

    How about overburn tests? I have many times wanted to burn 50-100MB more than a standard single-layer disk but failed because my drive or software won't do it.
  • Codyman - Monday, November 1, 2004 - link

    I'm kinda wondering if a PX716A couldn't get crammed into this test somehow. Been waiting for this review in hopes that it would've been in this test and I haven't been waiting the extra couple months for nothing.
  • danidentity - Monday, November 1, 2004 - link

    I'd like to see a list of recommended media for different speed grades (4x, 8x, etc.) for different burners.
  • techfuzz - Monday, November 1, 2004 - link

    Why weren't the firmware on all the drives tested brought up to at the very least the most recent officially released version? For example, NEC's current official firmware is v2.17 where the v2.16 used in this roundup is the original firmware as-shipped from the factory?!
  • Bozo Galora - Monday, November 1, 2004 - link

    firmwares are on www.cdrinfo.com
  • ecouser - Monday, November 1, 2004 - link

    Doesn’t Samsung make a Dual Layer DVD burner? If so why isn’t it in this roundup?
  • MIDIman - Monday, November 1, 2004 - link

    Yay! I'm a winner! I was waiting for this article, but couldn't wait long enough, and picked up the NEC two weeks ago. Couldn't be happier.

    Here's hoping for better Ritek 8x/16x support...

Log in

Don't have an account? Sign up now